VAULT





ACRYLOYL IS AN EXCEPTIONAL PRODUCT.

It has the highest fire and smoke ratting in its class, ( test results 10 FS and 0 SD ) it is chemical neutral and awarded The Living Building Challenge 3.1. This highly diverse paneling system has been rigorously tested, certified, and has a working history of excellence in the field for many industries, notably controlled containment up to levels BSL4 / PC3.




ACCESSORIES

Trim Accessories: Manufacturer's standard acrylic finishing accessories designed to provide air tight, leak proof and gas tight seal available in thickness from .060” to 1.250 in various sizes and may be installed in wall or ceiling panels.

Finishing Accessories include the following:
Grommets

Face Plates

Device Trim Plates

Fire Outlet Boxes

Slip Connections

Access Doors

Escutcheons

Cabinets

Acrylic finishing accessories are labeled as combustible and classified by UL as slow burning plastic. Protect material from flames and high heat sources.

Flame Spread: 140 per 3mm thickness – ASTM E 84

Smoke Density: 10.3% - ASTM D 2843

Self Ignition temperature: 910F (1.5mm) thickness – ASTM D 1929

Flush Glazed Window Unit

Flush glazed extruded aluminum interior window assembly; fully integrated and sealed into wall construction with manufacturers high strength finishing compound.

1) Delivers air, moisture and gas leak tight unit

2) Resistant to Fungi & Bacteria and does not support microbial growth.

3) Resistant to high pressure wash, sanitation and decontamination regimen.

4) Meets regulatory requirements including FDA 21 CFR Finish: Clear anodized, corrosion resistant.

Size: Custom.

Glazing: 5/16 (8mm) inch tempered glass.

1) Single glazed.

2) Double glazed.

Wall and Ceiling Panel Accessories:

Splines: Aluminum.

Battens: Solid engineered polymer resin and filler matrix, same color as composite panels.

Wall Base:

Solid engineered polymer resin and filler matrix, same color as composite panels.

Surface mounted galvanized termination strip.

Surface mounted stainless steel termination strip.


Acryloyl : CWO | Ceiling walk on / Direct attach
Acryloyl : CDA-1-EP
Acryloyl ceiling panel spline assembly


Acryloyl : CDA-2-EP
Acryloyl ceiling panel over gypsum board spline assembly


Acryloyl : CDA-3-EP
Acryloyl ceiling panel spline assembly existing conditions


Acryloyl : CDA-4-EP
Acryloyl ceiling panel spline assembly insulated metal panel system


Acryloyl : CDA-5-EP
Acryloyl ceiling panel 6mm joint assembly insulated metal panel system


Acryloyl : CDA-6-EP
Acryloyl ceiling panel 6mm temporary ceiling attaching assembly


Acryloyl : CDA-7-EP
Acryloyl ceiling panel spline assembly concrete structure


Acryloyl : CDA-8-EP
Acryloyl ceiling panel 6mm batten strips at joints


Acryloyl : CDA-9-EP
Acryloyl ceiling panel to laminate covering mounted equipment


Acryloyl : CDA-10-EP
Acryloyl ceiling panel to masonry wall


Acryloyl : CDA-11-EP
Acryloyl ceiling panel to gypsum board wall



Acryloyl : CWO | Ceiling walk on / Direct attach
Acryloyl : CWO-2-EP
Acryloyl, (ceiling walk on). Direct attach assembly


Acryloyl : CWO-4-EP
Acryloyl, (ceiling walk on). Wall panel, wall to direct attach ceiling, fire rated wall



Acryloyl : BA | Base Assembly : Freestanding wall to floor
Acryloyl : BA-10-EP
Acryloyl. Wall partition wall to floor connection


Acryloyl : BA-11-EP
Acryloyl. Wall partition wall to floor connection flush base



Acryloyl : CIT | Ceiling Lay-in system
Acryloyl : CIT-4-EP
Acryloyl. Lay-in ceiling panel 6mm


Acryloyl : CIT-7-EP
Acryloyl. Lay-in ceiling panel with access door



Acryloyl : CDA | Ceiling direct attach lining system
Acryloyl : CDA-2-EP
Acryloyl. Ceiling panel over gypsum board spline assembly



Acryloyl : PP | Panel partition wall ceiling system
Acryloyl : PP-9-EP
Acryloyl. Wall to ceiling


Acryloyl : PP-10-EP
Acryloyl. Wall to ceiling spline assembly


Acryloyl : PP-13-EP
Acryloyl. Wall to wall inside corner


Acryloyl : PP-18-EP
Acryloyl. Wall to ceiling with direct attach (walk-on ceiling)


Acryloyl : PP-19-EP
Acryloyl. Wall to direct attach fire rated wall (walk-on ceiling)


Acryloyl : PP-20-EP
Acryloyl. Wall to wall outside corner stainless steel



Acryloyl : PP | Panel wall ceiling Lining system
Acryloyl : PP-2-EP
Acryloyl. Wall panel over gypsum board spline assembly


Acryloyl : PP-5-EP
Acryloyl. Panel over gypsum board wall partition


Acryloyl : PP-33-EP
Acryloyl. Wall panel over existing condition edge detail


Acryloyl : PP-34-EP
Acryloyl. Wall panel 6mm over gypsum board assembly


Acryloyl : PP-35-EP
Acryloyl. Wall panel 6mm over gypsum board, wall to ceiling


Acryloyl : PP-36-EP
Acryloyl. Wall panel 6mm over gypsum board wall to wall inside corner


Acryloyl : PP-37-EP
Acryloyl. Wall panel 6mm over gypsum board wall to wall outside corner stainless steel




ACRYLOYL : COLOR FAST TEST REPORTS
Acryloyl : ASTM_D1308
Acryloyl : Surface sealant chemical compatibility. Oct.. 16,2017


Acryloyl : NC-ARC16910A-1
Acryloyl : Coloration test report. Sep 23, 2016



ACRYLOYL : FIRE & SMOKE TEST REPORTS
Acryloyl : SV18619 / 4788361213
Acryloyl : Surface Burning Characteristics of Engineered Polymer Panels. March 7, 2018


Acryloyl : G102596804SAT-001. ISO 9705:1993(E)
Acryloyl : Full scale room test for surface products June 13, 2016


Acryloyl : Report no : 406133. EN 13501-1:2007+A1 / ISO 11925-2
Acryloyl : Reaction to fire performance Oct.. 22, 2009

Acryloyl : Report no : 103015795SAT-003A. ASTM E84-16 / UL 723, UBC 8-1, NFPA 255
Acryloyl : Surface burning characteristics of building materials. Apr 24, 2017



ACRYLOYL : MECHANICAL TEST REPORTS
Acryloyl : Lab No. 16P-3867
Acryloyl : Interior corner peel strength test. Aug.. 19, 2016


Acryloyl : Lab No 16P-1259
Acryloyl : Pull out strength of variable fasteners. Mar 15, 2016


Acryloyl : Lab No. 16P-4391
Acryloyl : Seismic shear strength load test solid panel. Oct.. 16, 2016


Acryloyl : Lab No. 16P-3867
Acryloyl : Seismic shear strength test lateral movement. Aug.. 19, 2016



ACRYLOYL : PHYSICAL TEST REPORTS
Acryloyl : Lab No. 16P-4391
Acryloyl : Impact Resistance (2lb Steel Ball Dropped Causing No Damage). OCT 14, 2016


Acryloyl : Lab No. 16P-4391
Acryloyl : Coefficient of Linear Thermal Expansion METHOD: ASTM D696-08 (Temperature Range: -30oC to + 30oC). OCT 14, 2016


Acryloyl : ASTM D3274-09 (20017)
Acryloyl : Evaluation degree of surface disfiguration of paint films by fungal or algal growth, or soil and dirt accumulation. Apr. 4, 2018


Acryloyl : Lab 130820 / ISO 848
Acryloyl : Evaluation of the action of microorganisms- Resistance to fungi and bacteria test method ISO 845. Apr. 20, 2018


Acryloyl : Lab no : 16P-4391/ ASTM D523-14
Acryloyl : Physical properties test specular gloss ASTM D523-14. Oct.. 14, 2016


Acryloyl : Lab No. 16P-4391 / ASTM D570-98
Acryloyl : Water Absorption 24hr immersion Method : ASTM D570-98 (Reapproved 2010). Oct.. 14, 2016


Acryloyl : Lab No. 16P-4391/ ASTM D2583-07 / ASTM D2583-07
Acryloyl : Standard test method for indentation hardness of rigid plastics by means of a barcol impressor. Oct.. 14, 2016


Acryloyl : Lab code 200291/ ASTM E90-09/E413-10?E1332-10a
Acryloyl : Sound transmission loss test. Oct.. 14, 2016


Acryloyl : Lab No. 16P-4391 / ASTM D790-15
Acryloyl : Flexural strength test using Instron 5500R with Bluehill software. Oct.. 14, 2016


Acryloyl : Lab No. 16P-4391 / ASTM D638-14
Acryloyl : Tensile strength test. Method: ASTM D638-14. Oct.. 14, 2016


Acryloyl : Lab No. 16P-4391 /ASTM E 96 Desiccant Procedure
Acryloyl : Water Vapor Permeance. Oct.. 14, 2016


AIR PRESSURE DECAY : The use of Acryloyl Finishing Compound, which is equally as impermeable, results in an air, gas, and water vapor tight assembly. The process creates a smooth, seamless seal between panels and panel intersections that will not crack or deteriorate.

CLEANING : Acryloyl will withstand up to and greater than 30 years of vigorous decontamination or wash-downs. It will not decay, dent, fade, or peel, so it will not need to be painted or re-finished.

IMPACT : The Acryloyl system is designed to outlast the life of the facility. Acryloyl is impact, corrosion, and chemical resistant, and very robust.

MOISTURE and WATER : Acryloyl is impervious to microorganisms, impermeable from the front and back, unaffected by moisture and cannot be attacked by insects or vermin. Acryloyl is particularly well suited for flood hazard and coastal high-risk hazard areas.


BARRIER TESTS CONDUCTED USING 12.5mm ACRYLOYL

Result

Test

Description

Pass

ASME N510

Air pressure decay nuclear air treatment systems test

Pass

MEP test

Air pressure decay test on accessories relating to MEP test

Pass

Test

Air pressure decay test on expansion joint & electrical face plates test

Pass

Test

Air pressure decay test on screw penetrations test

Pass

BSL-3, BSL-4

Air pressure decay test small chamber BSL-3, BSL-4 test

Pass

Test

Supplemental helium leak testing

Pass

Report

Window panel pressure decay test report

ACRYLOYL Standard COLOR : Pristine white.

ACRYLOYL CUSTOMISED COLOR RANGE : Match any PMS color

COLORATION FASTNESS : Surface color retention and durability based on cleaning and decontamination

ACRYLOYL FINISH : Acrylic on both face and back surfaces

ACRYLOYL SURFACE FINISH : Satin or high-gloss

LIGHTING : Acryloyl’s pristine high gloss, bright white finish has been shown to produce a light reflectivity of 99.7 % at an 85 degree source angle, so a laboratory can be designed with fewer lamp fixtures, reducing the amount of penetrations to the ceiling surface and evenly diffusing the light throughout the room.

COLOR SURFACE TESTS CONDUCTED USING 12.5mm ACRYLOYL

Result

Test

Description

Pass

ISFA 2-01/td

Arcoplast cleanability & stain resistance

Pass

ASTM D 1308-02

Arcoplast surface and sealant chemical compatibility

Pass

ISO 2812-4

Arcoplast surface and sealant chemical compatibility

Pass

Coloration

Chlorine dioxide decontamination procedure

Pass

Coloration

Formaldehyde gas decontamination procedure

Pass

Coloration

Hydrogen peroxide vapor decontamination procedure

Pass

UV test

Exposure cycles

Arcoplast fiberglass polymer composite panels have the unique ability to integrate both shielding and barrier functions in a single finished product.

Arcoplast is used in mission critical environments and BSL-3, BSL-3Ag and BSL-4 facilities. Our products excel on air pressure decay tests, keeping interior and exterior personnel safe from harmful pathogens.

Arcoplast meets and exceeds USDA, FDA, cGMP, BMBL 5th Edition, USP 797 Compliant, GLSP, NIH and CDC specific guidelines for maximum containment facilities.

COMPLIANCE TESTS CONDUCTED USING 12.5mm ACRYLOYL

Result

Test

Description

Pass

MEA 414-04-M

City of New York Department of Buildings

Pass

US FDA 21 CFR 177.2600

Determination of Extractives Residue according to US FDA

Pass

LBC 3.1

Living Building Challenge 3.1

Pass

CSI 3-Part Format

Product Guide Specification Written According To CSI 3

Pass

Compliant test

USDA, FDA, NIH, CDC, NIAID, CANADA AGRICULTURE Compliant


ACRYLOYL SHEET SIZES

ACRYLOYL sheet sizes are made to your requirement within the parameters of the following thicknesses, widths and lengths.

IMPERIAL


ACRYLOYL SIZES & WEIGHTS IMPERIAL
Thickness Width Length Weight R/K Rating
1/4in 4 feet 3 - 16 feet 2 Lbs/Sq. Ft -
3/8in 4 feet 3 - 16 feet 3.5 Lbs/Sq. Ft -
1/2in 4 feet 3 - 16 feet 4.4 lbs./ Sq. Ft -
3/4in 4 feet 3 - 16 feet 6.3 lbs./ Sq. Ft -
Tolerance +/- 1/16in width +/- 1/2in length    


Acryloyl IMERPIAL PROFILE & JOINT SYSTEM

END CUT PROFILE

1/4in 3/8in 1/2in 3/4in

Grooved

 

Yes Yes Yes

Square cut

Yes Yes Yes Yes

 

SIDE CUT PROFILE

1/4in 3/8in 1/2in 3/4in

Eased side edge

 

Yes Yes Yes

Grooved

 

Yes Yes Yes

Square cut

Yes Yes Yes Yes

 

JOINT SYSTEM

1/4in 3/8in 1/2in 3/4in

Batten cover

Yes Yes Yes Yes

Cam lock

 

 

 

Yes

Flush seam

Yes Yes Yes Yes

Welded seam

Yes Yes Yes Yes


ACRYLOYL SHEET SIZES

ACRYLOYL sheet sizes are made to your requirement with the parameters of the following thicknesses, widths and lengths.


METRIC


ACRYLOYL METRIC SIZES & WEIGHTS
Thickness Width Length Weight R/K Rating
6mm 1200mm 900mm - 4875mm 9.7 Kg/M2 -
9.5mm 1200mm 900mm - 4875mm 17.09 Kg/M2 -
12.5mm 1200mm 900mm - 4875mm 21.48 Kg/M2 -
19mm 1200mm 900mm - 4875mm 30.2 Kg/M2 -
Tolerance +/- 1.5mm width +/- 12.5mm length    


ACRYLOYL METRIC PROFILE & JOINT SYSTEM

END CUT PROFILE

6mm 9.5mm 12.5mm 19mm

Grooved

 

Yes Yes Yes

Square cut

Yes Yes Yes Yes

 

SIDE CUT PROFILE

6mm 9.5mm 12.5mm 19mm

Eased side edge

 

Yes Yes Yes

Grooved

 

Yes Yes Yes

Square cut

Yes Yes Yes Yes

 

JOINT SYSTEM

6mm 9.5mm 12.5mm 19mm

Batten cover

Yes Yes Yes Yes

Cam lock

 

 

 

Yes

Flush spline

Yes Yes Yes Yes

Welded seam

Yes Yes Yes Yes



ACRYLOYL COLOR RANGE

Color

Color pristine white

Custom color

Full range of PMS colors


ACRYLOYL RANGE OF FINISHES

Custom forming

Thermo-formable for curved and custom applications

Panel surface

Acrylic finish on both surfaces

Surface finish

Satin or high gloss

Surface profile

Sanded or polished surface

In 2009 under the Plastic Chapter 26, the International Building Code (IBC) created a division which addresses fiberglass reinforced polymer composite materials. This enables architects, specifiers and building owners to clearly interpret and conform to a uniform building code.

Composite materials are not incombustible, however the combustibility level can be significantly reduced through proper chemistry engineering. The surface burning characteristics of building materials manufactured in the United States are tested per the (American Standard Testing Method) (ASTM-E 84). In Canada it is determined by Underwriters Laboratories S-102. In Europe, composite materials are tested in accordance with European Standard EN 13823, EN ISO 11925 and EN 13501.

Interior finishes are classified according to their flame spread and smoke spread development indexes.

FIRE & SMOKE TESTS CONDUCTED USING 12.5mm ACRYLOYL

Result

Test

Description

B-s1-d0

EN 13501-1 – Europe, Asia

Classification of reaction to fire performance, in accordance with – Europe, Asia

Pass

ISO 9705 Annex B

Full scale room fire test

MEA 64-96-M

UPITT Protocol Toxicity Test

Measurement of acute lethality decomposition products

10.8 FS - 6.1 SD

UL S-102 Test

On surface burning characteristics (Must be on full composite construction – Canada)

10 FS - 0 SD

ASTM E-84 Test

On surface burning characteristics (Must be on full composite construction – USA)

Pass

UL 94 – 5VA 500W

Vertical burning test



Manufacturers usually publish the class only. However, there should be a more scrupulous look into the numbers. Owners and architects should require the test results for the flame and smoke generation to better assess the suitability of the interior finishes.

A composite material labeled as a Class A (Flame Spread 0-25) may not have a large margin of improvement because it is already in a low category. But, the (Smoke Development 0-450) is extremely critical, and a composite material with a smoke development of 425 versus 50 can have catastrophic consequences in a high occupancy high rise building.

Another area of concern is the toxicity issue in composite building materials. The City of New York requires testing on materials for acute lethality. This is based on the test methodology specified in the Building Code for the City of New York and as published by the University of Pittsburgh, Department of Industrial Environmental Health Sciences (The UPITT Test - The University of Pittsburgh Test Protocol for Measurement of Acute Lethality of Thermal Decomposition Products from Specimens).

The test has a pass/fail criteria. It must not be more toxic than wood, which produces a 50 percent lethality rate at a total mass of 19.7 grams. Upon the receipt of successful test results, the City of New York will grant a Materials and Equipment Acceptance (MEA) number for the designated product.

[Note: International Building Code Chapter 8 Section 8901.1.1. on interior finishes. Exception: Materials having a thickness less that 0.036 inch (0.9mm) applied directly to the surface of walls or ceilings.]

The IBC does not factor in primers and paint applications or high-performance coatings as an integral part of a wall or ceiling system, whether constructed using a light gauge steel stud and drywall composition or masonry wall. Historically, manufacturers have only been required to test the primer and paint product and coatings without the substrate. It is therefore highly uncertain as to the classification of a given system unless the whole assembly is tested.

Arcoplast fiberglass reinforced composite panels also comply with the IBC Chapter 8 Section 801.1.3 referring to interior finishes below the design flood elevation to be flood-damage-resistant materials.

ACRYLOYL INSTALLAION MANUAL



• Download Acryloyl Installation manual •


Borrowed from the light gauge steel stud construction methods, Arcoplast fiberglass reinforced composite wall and ceiling systems do not require elaborate pre-engineering preparations in drawings and installation documents and interface well with typical building fixtures such as door and window frames, MEP’s, flooring finishes, etc.

Arcoplast panels are manufactured in modular panel board form that are cut, bored, and fastened in the field reducing engineering and fabrication time and costly project delays due to last minute order changes.
Arcoplast has an extensive library of application drawings and installation details specifically adapted to the construction of high containment facilities.
Arcoplast panels are permanently finished with a smooth, high gloss antimicrobial gel coat, requiring only one trade application and a dry construction environment.


ACRYLOYL INSTALLAION VIDEO







Mechanical and Physical Properties
The mechanical and physical properties of building materials should be carefully considered when planning the construction of high containment facilities. Flexural and compressive strength, surface hardness, gloss property, coefficient of expansion and contraction, impact resistance and water vapor transmission are crucial factors in the material selection process.

Disappointment and failures are, in many cases, associated with a poor performance of materials or systems design.


Arcoplast Mechanical and Physical Properties comparison chart


Consider this example: A wall to footprint ratio is approximately 1.72 feet times the floor surface. With a 5,000 square foot footprint, the laboratory space will yield approximately 8,600 square feet of partition surface.

Arcoplast Panel System: 7 lbs. x 8600 sq. ft. = 60,200 lbs.

Masonry Block: 45 lbs. x 8,600 sq. ft. = 387,000 lbs.

Poured in Place Concrete: 100 lbs. x 8,600 sq. ft. = 860,000 lbs.

At 7 pounds per square foot, Arcoplast panel systems would clearly cause the least stress on the building. The structural and environmental integrity is achieved through light gauge steel stud framing and Arcoplast modular panel system that work in harmony with the building movement, and constant air cycle movement generated by the air handling systems.


Arcoplast high containment estimate materials graphics



MECHANICAL TESTS CONDUCTED USING 12.5 MM ACRYLOYL
Result Test

Description

92.78 lbf Interior corner assembly

Joint peel strength test

Pass Partition load bearing

Partition load bearing test

733 lbs Ex. #6 x 25mm Pan Phillips SDS

Pull-out strength of variable fasteners test

Pass FEA report

Seismic loading compliance - FEA report on structural analysis report

791 lbf Corner section assembly

Seismic shear strength test lateral movement – corner section assembly test

629 lbf Peak load

Seismic shear strength test load (peak load) solid panel test

380 lbf Spline joint assembly

Seismic shear strength test panel – spline joint assembly test

Pass System load

Walk-on ceiling system load test


Arcoplast panels can perform as cavity-less free-standing partitions, which enable lab planners and architects to design suites for areas in which space and location is critical and for environments in which wall cavities are not suitable.

Arcoplast panels may be assembled in virtually any configuration, providing the ultimate in design flexibility and allowing for cost-effective “box-within-a-box” construction, walk-on ceilings, wall and ceiling liners, load bearing partitions, chase systems, beam covers and bulkheads. They can be easily adapted to new or existing construction and particularly well suited for high rise buildings.

The weight of building materials plays an essential role in the architecture, design, and engineering of a building, and equally a significant factor in the cost effectiveness of a project. Design and weight limitations, building movement and demanding construction schedules must be carefully assessed. The cost to reinforce a building’s foundation and structure to support the added weight of interior wall and ceiling systems can be exceedingly expensive.


PHYSICAL TESTS CONDUCTED USING 12.5 MM ACRYLOYL
Result Test

Description

58 ASTM D 2583

Barcol indentation hardness test

22.43 x 10-6 in/in°F ASTM D 696-03

Coefficient of linear thermal expansion test

12502 psi ASTM D 695-02a

Compressive strength properties test

Pass ASTM D3274

Degree of surface disfigurement by fungal/algal growth test

200°F ASTM D 648

DTUL – Deflection temperature under load test

7504 psi ASTM D 790-03

Flexural properties for Reinforced plastics test

11’ x 2 lbs Mil 1073.2

Impact resistance test

Pass ASTM D3273

Resistance to mold on the surface test

Pass

ISO 846A-B-C

Resistance to bacteria test

0.8 R-Value ASTM D177

Thermal conductivity test

0.05 ASTM C 423-09a / E 795-05

Sound absorption Test

59 ASTM E 90-09 / E 413-10

Sound transmission loss test

99.8 ASTM D 523

Specular gloss test

Pc750 ISO 10012-1

Surface profile & surface finish analysis test

3490 psi ASTM D 638-03

Tensile properties test

0.01 ASTM D 570 (24 hrs)

Water absorption test

0.04 ASTM E 96-05

Water vapor transmission test

GFRMC IS THE LARGE LIGHT WEIGHT ARCOPLAST PANELING SYSTEM.

GFRMC is a big answer to a-lot of small problems, the large panel sizes can be custom cut to your specifications, and they are relatively quick and easy to apply. Please note the Arcoplast two step direct attachment process : Direct attach to the wall or ceiling with tape and adhesives, the following day Bio-Seal finishing compound unifies the sheets into a single membrane, clean up and you're finished.





GFRMC : Direct attach ceiling panel system
GFRMC : CDA-1-MC
GFRMC : GFRMC : Ceiling panel joint assembly


GFRMC : CDA-2-MC
GFRMC : GFRMC : Ceiling panel over gypsum board spline assembly


GFRMC : CDA-3-MC
GFRMC : GFRMC : Ceiling panel spline assembly existing conditions


GFRMC : CDA-5-MC
GFRMC : GFRMC : Ceiling panel 5.0 mm joint assembly insulated panel system


GFRMC : CDA-6-MC
GFRMC : Ceiling panel 5.0 mm temporary ceiling attaching assembly


GFRMC : CDA-7-MC
GFRMC : Ceiling panel spline assembly concrete structure


GFRMC : CDA-10-MC
GFRMC : Ceiling panel to masonry wall


GFRMC : CDA-11-MC
GFRMC : Ceiling panel to gypsum board wall


GFRMC : Liner Systems
GFRMC : PP-2-MC
GFRMC : GFRMC : Wall panel over gypsum board spline assembly


GFRMC : PP-5-MC
GFRMC : GFRMC : Panel over gypsum board wall partition


GFRMC : PP-8-MC
GFRMC : GFRMC : Wall panel joint assembly existing conditions


GFRMC : PP-11-MC
GFRMC : GFRMC : Wall panel wall to ceiling existing conditions


GFRMC : PP-14-MC
GFRMC : GFRMC : Wall panel wall to wall existing conditions


GFRMC : PP-17-MC
GFRMC : GFRMC : Wall panel joint assembly insulated metal panel system


GFRMC : PP-22-MC
GFRMC : GFRMC : Wall panel 5.0 mm temporary wall attaching assembly


GFRMC : PP-23-MC
GFRMC : GFRMC : Wall panel spline assembly concrete structure


GFRMC : PP-24-MC
GFRMC : GFRMC : Wall panel spline assembly brick structure


GFRMC : PP-25-MC
GFRMC : GFRMC : Wall panel spline assembly with parallel furring support


GFRMC : PP-26-MC
GFRMC : GFRMC : Wall partition both sides of wall insulated metal panel system with floor base curb


GFRMC : PP-27-MC
GFRMC : GFRMC : Wall partition one side of wall insulated metal panel system with floor base curb


GFRMC : PP-33-MC
GFRMC : GFRMC : Wall panel over existing condition edge detail


GFRMC : PP-34-MC
GFRMC : GFRMC : Wall panel 5.0 mm over gypsum board assembly


GFRMC : PP-35-MC
GFRMC : GFRMC : Wall panel 5.0 mm over gypsum board wall to ceiling


GFRMC : PP-36-MC
GFRMC : GFRMC : Wall panel 5.0 mm over gypsum board wall to wall inside corner


GFRMC : PP-37-MC
GFRMC : GFRMC : Wall panel 5.0 mm over gypsum board wall to wall outside corner stainless steel


GFRMC : PP-43-MC
GFRMC : GFRMC : Wall panel 5.0 mm over existing conditions assembly


GFRMC : Partition Walls
GFRMC : PP-1-MC
GFRMC : GFRMC : Wall panel joint assembly


GFRMC : PP-4-MC
GFRMC : GFRMC : Wall partition


GFRMC : PP-9-MC
GFRMC : GFRMC : Wall panel wall to ceiling


GFRMC : PP-10-MC
GFRMC : GFRMC : Wall panel wall to ceiling spline assembly


GFRMC : PP-13-MC
GFRMC : GFRMC : Wall panel wall to wall inside corner


GFRMC : PP-20-MC
GFRMC : GFRMC : Wall panel wall to wall outside corner stainless steel


GFRMC : PP-30-MC
GFRMC : GFRMC : Wall panel spline assembly insulated wall


GFRMC : PP-31-MC
GFRMC : GFRMC : Wall partition to gypsum board wall


GFRMC : PP-32-MC
GFRMC : GFRMC : Wall partition to gypsum board ceiling


GFRMC : PP-44-MC
GFRMC : GFRMC : Wall panel 5.0 mm new conditions assembly


GFRMC : PP-49-MC
GFRMC : GFRMC : Wall partition with drywall one side


GFRMC : PP-64-MC
GFRMC : GFRMC : Wall panel top of panel termination existing conditions






GFRMC : COMPLIANCE REPORTS


GFRMC : CSI 3-Part Format
GFRMC : Construction Specification Institute. June 13, 2020




GFRMC : FIRE & SMOKE TEST REPORTS
GFRMC : ASTM-E84
GFRMC : Smoke development and Flame spread report 5mm. March 25, 2020


GFRMC : ASTM-E84
GFRMC : Smoke development and Flame spread report 9.5mm. March 25, 2020



GFRMC : MECHANICAL TEST REPORTS
GFRMC : 20P-2156
GFRMC : 5mm Lap shear strength test on concrete with A2020 adhesive no tape. May 21, 2020


GFRMC : 20P-2156
GFRMC : 5mm Shear strength test on metal plate with tape and A2020 adhesive. May 21, 2020


GFRMC : 20P-2156
GFRMC : 5mm Tensile strength test on metal plate with A2020 and tape. May 21, 2020


GFRMC : 20P-2156
GFRMC : 5mm Tensile strength test on metal plate with A2020 and no tape. May 21, 2020


GFRMC : 20P-2156
GFRMC : 9.5mm Lap shear strength test on concrete with A2020 adhesive no tape. May 21, 2020


GFRMC : 20P-2156
GFRMC : 9.5mm Seismic shear strength test with spline and A2020 adhesive. May 21, 2020


GFRMC : 20P-2156
GFRMC : 9.5mm Shear strength test on metal plate with tape and A2020 adhesive. May 21, 2020


GFRMC : 20P-2156
GFRMC : 9.5mm Tensile strength test on metal plate with A2020. May 21, 2020


GFRMC : 20P-2156
GFRMC : 9.5mm Tensile strength test with spline and A2020. May 21, 2020



GFRMC : PHYSICAL TEST REPORTS
GFRMC : MIL 1073.2
GFRMC : Impact resistance test with 2lbs. ball drop method. May 21, 2020


GFRMC : ASTM D2583-13a
Standard test method for indentation hardness of rigid rigid plastics by mean of barcol impresser. May 21, 2020


GFRMC : ASTM D696-08
Coefficient of linear thermal expansion test. May 21, 2020


GFRMC : ASTM D523-14
Standard test method of specular gloss. May 21, 2020


GFRMC : ASTM D570-98
GFRMC : 5mm Water absorption, 24-hour immersion. June 10, 2020


GFRMC : ASTM E96
GFRMC : 5mm Water vapor transmission and permeance test. June 10, 2020


GFRMC : ASTM D695-15
GFRMC : 5mm Compressive strength properties test. May 21, 2020


GFRMC : ASTM D790-17
GFRMC : 5mm Flexural strength test. May 21, 2020


GFRMC : ASTM D638-14
GFRMC : 5mm Tensile strength test. May 21, 2020


GFRMC : ASTM D570-98
GFRMC : 9.5mm Water absorption, 24-hour immersion. June 10, 2020


GFRMC : ASTM E96
GFRMC : 9.5mm Water vapor transmission and permeance test. June 10, 2020


GFRMC : ASTM D695-15
GFRMC : 9.5mm Compressive strength properties test. May 21, 2020


GFRMC : ASTM D790-15
GFRMC : 9.5mm Flexural strength test. May 21, 2020


GFRMC : ASTM D638-14
GFRMC : 9.5mm Tensile strength test. May 21, 2020



AIR PRESSURE DECAY : The use of Bio-Seal finishing compound, which is equally as impermeable, results in an air, gas, and water vapor tight assembly. The process creates a smooth, seamless seal between panels and panel intersections that will not crack or deteriorate.

CLEANING : GFRMC will withstand up to and greater than 30 years of vigorous decontamination or wash-downs. It will not decay, fade, or peel, so it will not need to be painted or re-finished.

IMPACT : The GFRMC system is designed to outlast the life of the facility. GFRMC is corrosion, and chemical resistant, and very robust.

GFRMC : Having the least amount of vapor transmission of all Arcoplast products making it suitable for diverse environmental conditions. Such as commercial kitchens and high humidity production areas.

BARRIER TESTS CONDUCTED USING 13/64in / 5mm GFRMC
Result Test

Description

Pass Test

Air pressure decay test on accessories relating to MEP

Pass Test

Air pressure decay test small chamber

Pass Test

Air pressure decay test on electrical and monitoring face plates

Pass Test

Air pressure decay test Arcoplast cGMP window housing

Pass Test

Air pressure decay test on screw penetrations

GFRMC COLOR : Standard color, pristine white

GFRMC CUSTOMISED COLOR RANGE : Match PMS colors

GFRMC COLORATION FASTNESS : Surface color retention and durability based on cleaning and decontamination.

GFRMC SURFACE FINISH : Smooth

GFRMC SURFACE PROFILE : Polished surface


COLORATION FASTNESS TESTS CONDUCTED USING 13/64in / 5mm GFRMC

Result Test

Description

Pass Coloration

Coloration test on formaldehyde gas decontamination process

Pass Coloration

Coloration test on hydrogen peroxide vapor decontamination process

Pass Coloration

Coloration test on chloride dioxide vapor decontamination process

Pass ISO 2812-4

Arcoplast surface and sealant chemical compatibility tests

Pass ASTM D-1308-02

Arcoplast surface and sealant chemical compatibility tests

Pass ISFA 2-01

Arcoplast clean ability and stain resistance

Compliance Arcoplast fiberglass polymer composite panels have the unique ability to integrate both shielding and barrier functions in a single finished product. Arcoplast is used in mission critical environments and BSL-3, BSL-3Ag and BSL-4 facilities. Our products excel on air pressure decay tests, keeping interior and exterior personnel safe from harmful pathogens. Arcoplast meets and exceeds USDA, FDA, cGMP, BMBL 5th Edition, USP 797 Compliant, GLSP, NIH and CDC specific guidelines for maximum containment facilities.

COMPLIANCE TESTS CONDUCTED USING 13/64in / 5mm GFRMC Information being put together. Information being put together.

Result Test

Description

Pass CSI 3-Part Format

Product Guide Specification Written According To CSI 3

Pass Compliant test

USDA, FDA, NIH, CDC, NIAID, Canada agriculture Compliant


IMPERIAL


GFRMC IMERPIAL SHEET SIZES

Arcoplast sheet sizes are made to your requirement within the parameters of the following thicknesses, widths and lengths.

Thickness Width Length Weight R/K Rating
13/64in 48in - 108in Up to 40ft 1.09 lbs./ Sq. Ft -
3/8in 48in - 108in Up to 40ft 1.4 lbs./ Sq. Ft -

GFRMC IMERPIAL PROFILE & JOINT SYSTEM

END CUT PROFILE

13/64in 3/8in    

Grooved

 

Yes    

Eased side edge

 

 

   

Square cut

Yes Yes    
 

SIDE EDGE PROFILE

13/64in 3/8in    

Eased side edge

       

Grooved

 

Yes    

Square cut

Yes Yes    
 

JOINT SYSTEM

13/64in 3/8in    

Batten cover

Yes

 

   

Flush seam

Yes Yes    

Mechanical spline

 

Yes    


METRIC


GFRMC SHEET SIZES

GFRMC sheet sizes are made to your requirement within the parameters of the following thicknesses, widths and lengths.


Thickness Width Length Weight R/K Rating
5mm 1.2 meter - 2.74 meter 1.2 meter - 12.2 meter 5.3kg/m2 -
9.5mm 1.2 meter - 2.74 meter 1.2 meter - 12.2 meter 6.1 kg/m2 -


GFRMC METRIC PROFILE & JOINT SYSTEM

END CUT PROFILE

5mm 9.5mm    

Grooved

 

Yes    

Eased side edge

 

 

   

Square cut

Yes Yes    
 

SIDE EDGE PROFILE

5mm 9.5mm    

Eased side edge

   

Grooved

 

Yes    

Square cut

Yes Yes    
 

JOINT SYSTEM

5mm 9.5mm    

Batten cover

Yes

 

   

Flush seam

Yes Yes    

Mechanical spline

 

Yes    

GFRMC COLOR RANGE

Color

Color pristine white

Custom color

Full range of PMS colors


GFRMC RANGE OF FINISHES

Panel surface

Front surface finish : Fire rated gel coated resin acrylic

Surface finish

Smooth gloss

Surface profile

Polished surface


FIRE & SMOKE TESTS CONDUCTED USING 13/64in / 5mm GFRMC
Result Test

Description

Class A–20 FS–SD-300 ASTM E-84

Surface burning characteristics of building materials

GFRMC HANDLEING & INSTALLAION


Handling / Storage: Handle panels with care and limit panel sagging to prevent warping and gel coat fissures. Keep contents dry. Store indoors in a well-ventilated area on flat wooden skids. Panel Protector - Remove protective film prior to edge detailing. Caution: Do not stack nor store any goods on the GFRMC panels and prevent foot traffic on stored panels. Crating / Transportation: Standard width panels of 4’0” and up to 16’-0” in length are crated and shipped on wooden crates. Dimensionally large panels of up to 9”-0” in width and up to 40’-0” in length are bundled and shipped on flatbed trailers.



GFRMC INSTALLAION OVERVIEW VIDEO



SURFACE PROPERTIES TESTS CONDUCTED USING 13/64in / 5mm GFRMC
Result Test

Description

Pass ASTM- D 523

Specular gloss test

Pass ASTM -E 96-05

Water Vapor transmission

Pass ASTM – D 570 (2HRS)

Water absorption

Pass ASTM – D 3273

Resistance to mold on surface

Pass ASTM –D 3274

Degree of surface disfigurement by fungal growth

Pass ISO 8464-B-C

Resistance to bacteria


Arcoplast Composite Fiberglass Liner Panel - GFRMC 5mm

Applications : Wall and Ceiling Systems requiring an ultra-lightweight, dimensionally large sanitary composite liner panel for cladding existing decayed surfaces and well suited for lining new wall and ceiling systems requiring minimum exposed panel joints.

Composition : Reinforcement – Chopped fiberglass strand.

Product : Arcoplast GFRMC 5mm is a non-woven composite core substrate reinforced with fiberglass/resin with a high gloss gel coat finish that provides a smooth, hard, and non-porous finish for easy clean ability and virtually maintenance free finish.

Resin : Fire Rated Polyester resin system.

Substrate : Polystyrene high strength core matrix.

Surface Finish : High gloss Fire Rated gel coat creating a smooth, impermeable surface profile with excellent chemical and corrosion resistance.



PHYSICAL TESTS CONDUCTED USING : 13/64in / 5mm GFRMC

Result Test

Description

51 ASTM-D2583.7

Barcol test indentation hardness

0.595 (Msi) ASTM-D695-15

Modulus compressive

613749.6 (psi) ASTM – D790-15

Modulus flexural

103374.8 (psi) ASTM – 638-14

Modulus tensile

5046.0 (PSI) ASTM-D695-15

Compressive strength

14469.9 (psi) ASTM - D790-15

Flexural strength

10100 (psi) ASTM – 638-14

Tensile strength



SURFACE PROPERTIES TESTS CONDUCTED USING : 13/64in / 5mm GFRMC
Result Test

Description

Pass ASTM –D 3274

Degree of surface disfigurement by fungal growth

Pass ISO 8464-B-C

Resistance to bacteria

Pass ASTM – D 3273

Resistance to mold on surface

Pass ASTM- D 523

Specular gloss test

2.33 ASTM – D 570 (2HRS)

Water absorption

0.00076

ASTM -E 96-05

Water Vapor transmission

GFRP : GELCOATED FIBERGLASS REINFORCED POLYMER

With a history of innovation, and 30 years in the field, GFRP is now considered the new science of containment. To design and build the highest level of containment anywhere in the world, all you need are four qualified products; GFRP panels, mechanical joint splines, dedicated structural adhesives and the finishing compound Bio-Seal. Before I forget I should mention, the installation process is completed, including auxiliary attachments, without any exposed fasteners!





GFRP : CDA | Ceiling direct attach
GFRP : CDA 1
GFRP ceiling panel spline assembly


GFRP : cda 2
GFRP ceiling panel over gypsum board spline assembly


GFRP : cda 3
GFRP ceiling panel spline assembly existing conditions


GFRP : CDA 4
GFRP ceiling panel spline assembly insulated metal panel system


GFRP : cda 5
GFRP ceiling panel 5mm joint assembly insulated panel system


GFRP : cda 6
GFRP ceiling panel 5mm temporary ceiling attaching assembly


GFRP : cda 7
GFRP ceiling panel spline assembly concrete structure


GFRP : cda 10
GFRP ceiling panel to masonry wall


GFRP : cda 11
GFRP ceiling panel to gypsum board wall



GFRP : C.W.O. | Ceiling walk on / direct attach
GFRP : C.W.O. 2
GFRP (walk-on ceiling) direct attach assembly


GFRP : C.W.O. 4
GFRP (walk-on ceiling) wall panel wall to direct attach fire rated wall



GFRP : PP | Panel assembly direct attach
GFRP : pp 18
GFRP (walk-on ceiling) wall panel wall to direct attach fire rated wall


GFRP : pp 19
GFRP (walk-on ceiling) wall panel wall to walk-on ceiling fire rated wall



GFRP : CIT | Ceiling Lay-in system
GFRP : it 1
GFRP closed edge insulated lay-in panel


GFRP : it 2
GFRP gazetted closed edge insulated lay-in ceiling panel


GFRP : it 3
GFRP locking gazetted closed edge insulated lay-in ceiling panel


GFRP : it 4
GFRP lay-in ceiling panel 5mm


GFRP : it 5
GFRP closed edge insulated lay-in panel Acryloyl engineered polymer top of wall panel


GFRP : it 8
GFRP closed edge insulated lay-in panel insulated details



GFRP : P | Penetration procedure
GFRP : it 11
GFRP closed edge insulated lay-in panel ceiling item penetration detail


GFRP : p 2
GFRP closed edge insulated lay-in ceiling panel penetration procedure





GFRP : CDA | Ceiling direct attach lining system
GFRP : cda 6
GFRP ceiling panel 5mm temporary ceiling attaching assembly


GFRP : cda 7
GFRP ceiling panel spline assembly concrete structure


GFRP : cda 10
GFRP ceiling panel to masonry wall


GFRP : cda 11
GFRP ceiling panel to gypsum board wall


GFRP : PP | Panel partition wall ceiling system
GFRP : pp 11
GFRP wall panel wall to ceiling existing conditions


GFRP : pp 14
GFRP wall panel wall to wall inside corner existing condition


GFRP : pp 16
GFRP wall panel spline assembly insulated metal panel system


GFRP : pp 17
GFRP panel 5mm joint assembly insulated panel system


GFRP : pp 22
GFRP wall panel 5mm temporary wall attaching assembly


GFRP : pp 23
GFRP wall panel spline assembly concrete structure


GFRP : pp 24
GFRP wall panel spline assembly brick structure


GFRP : pp 25
GFRP wall panel spline assembly with parallel furring support


GFRP : pp 30
GFRP wall panel spline assembly insulated wall


GFRP : pp 33
GFRP wall panel over existing condition edge detail


GFRP : pp 34
GFRP wall panel 5mm over gypsum board assemble


GFRP : pp 35
GFRP wall panel 5mm over gypsum board wall to ceiling


GFRP : pp 36
GFRP wall panel 5mm over gypsum board wall to wall inside corner


GFRP : pp 37
GFRP wall panel 5mm over gypsum board wall to wall outside corner stainless steel


GFRP : pp 43
GFRP wall panel 5mm over existing conditions assembly


GFRP : pp 64
GFRP wall panel top of panel termination existing conditions



GFRP : BA | Wall partitions
GFRP : BA 1
GFRP wall panel to floor base joint with termination strip


GFRP : PP | Panel wall ceiling Lining system
GFRP : PP 1
GFRP wall panel spline assembly


GFRP : PP 4
GFRP wall partition


GFRP : PP 9
GFRP wall panel wall to ceiling


GFRP : PP 10
GFRP wall panel to ceiling spline assembly


GFRP : PP 13
GFRP wall panel wall to wall inside corner


GFRP : PP 20
GFRP wall panel wall to wall outside corner stainless steel


GFRP : PP 26
GFRP wall partition both sides of wall imp system with floor base curb


GFRP : PP 27
GFRP wall partition one side of wall imp system with floor base curb


GFRP : PP 31
GFRP wall partition to gypsum board wall


GFRP : PP 32
GFRP wall partition to gypsum board ceiling


GFRP : PP 49
GFRP wall partition with drywall one side




GFRP : BARRIER PROPERTIES TEST REPORTS
GFRP : ASME N510
GFRP : Air pressure decay nuclear air treatment systems test. Jun 29, 2006


GFRP : ASME N510
GFRP : Air pressure decay test on accessories relating to MEP. Aug 14, 2006


GFRP : ASME N510
GFRP : Air pressure decay test on screw penetrations. Mar 3, 2007


GFRP : ASME N510
GFRP : Air pressure decay test small chamber BSL-3, BSL-4. Jun 29, 2006


GFRP : PHAC level 4 containment
GFRP : Air pressure decay test on expansion joint & electrical face plates. Nov 9, 2010


GFRP : Arcoplast testing
GFRP : Supplemental helium leak testing. Aug 14, 2006



GFRP : COLORATION PROPERTIES TEST REPORTS
GFRP : ASTM D1308-02
GFRP : Chemical resistance testing on GFRP surface and sealant 72-hour test. Jan 3, 2014


GFRP : ISO 2812-4
GFRP : Chemical resistance testing on GFRP surface and sealant failure rate. Feb 14, 2014


GFRP : ARC062065A-01
GFRP : Coloration test chlorine dioxide decontamination procedure. Mar 8, 2007


GFRP : ARC062065A-01
GFRP : Coloration test formaldehyde gas decontamination procedure. Mar 3, 2007


GFRP : ARC062065A-01
GFRP : Coloration test hydrogen peroxide vapor decontamination procedure. Mar 3, 2007



GFRP : COMPLIANCY REPORTS
GFRP : MEA
GFRP : City of New York Department of Buildings. Mar 7, 2005


GFRP : CSI 3-Part Format
GFRP : Construction Specification Institute. Dec 21, 2014


GFRP : FIRE & SMOKE TEST REPORTS
GFRP : ISO 9705
GFRP : Annex B full scale room fire test. Oct 28, 2014


GFRP : EN 13501-1
GFRP : Classification of reaction to fire performance, in accordance with – Europe, Asia. Feb 18, 2011


GFRP : UL S-102
GFRP : Test on surface burning characteristics (Must be on full composite construction – Canada) Feb 18, 2011


GFRP : ASTM E-84
GFRP : Test on surface burning characteristics (Must be on full composite construction – USA). May 5, 2020


GFRP : GFRP : ISO 9705
GFRP : Investigation combustion products of Arcoplast cement core sandwich panel in accordance with article 4, section 27-335.1(2) and article 5, section 27~348E. March 31, 2005


GFRP : MECHANICAL TEST REPORTS
GFRP : Report 1106-867
GFRP : Pull-out strength of variable fasteners – ex. #6 x 25 mm Pan Phillips SDS. Nov 29, 2006


GFRP : PHYSICAL TEST REPORTS
GFRP : ASTM D696-03
GFRP : Coefficient of linear thermal expansion. Mar 17, 2011


GFRP : ISO 846
GFRP : Resistance to bacteria test. Aug 29, 2013


GFRP : ASTM D3273
GFRP : Resistance to mold on the surface test. Aug 28, 2013


GFRP : ASTM C 423 - 09a / E 795 - 05 Report no : NGC 4012079
GFRP : Sound absorption Arcoplast" Closed Edge Insulated Ceiling Tile Type E-400 Mount Aug 10, 2012


GFRP : ASTM C423-09a / E795-05
GFRP : Sound absorption test GFRP 9.5mm panel. Aug 10, 2012


GFRP : ASTM E 90-09/ E413-10/E1332-10a Report no : NGC 2012071
GFRP : Sound transmission 9.5mm on 5/8 drywall side 1 and 5/8 drywall side 2 on 3-5/8 in. steel stud with 3-1/2 in. fiberglass insulation. Aug 10, 2012


GFRP : ASTM E 90 - 09 / E 413 -10 Report no : NGC 2012041
GFRP : Sound transmission loss test GFRP : 9.5mm panel side 1 and no face side 2 on 3-5/8 in steel stud. Aug 10, 2012


GFRP : ASTM E 90 - 09 / E 413 -10 Report no : NGC 2012042
GFRP : Sound transmission 9.5mm panel side 1 and GFRP 9.5 side 2 on 3-5/8 in steel stud with 3 in. mineral wool insulation. Aug 10, 2012


GFRP : ASTM E 90 - 09 / E 413 - 10 Report no : NGC 2012043
GFRP : Sound transmission 9.5mm side 1 and 1/2in. drywall side 2 on 3-5/8 in. steel stud with 3 in. mineral wool insulation. Aug 10, 2012


GFRP : ASTM E 90-09 / E 413-10/E1332-10a Report no : NGC 2012072
GFRP : Sound transmission 9.5mm side 1 and 1/2in. drywall side 2 on 3-5/8 in. steel stud with 3 in. mineral wool insulation. Aug 10, 2012


GFRP : ASTM E 90-09/ E 413 -10 Report no : NGC-2012040
GFRP : Sound transmission wall Partition Assembly Consisting of Side 1 - No Face Materials Source Side of Partition Side 2 - Single Layer of Arcoplast" Closed Edge Insulated Ceiling Tile 3-5/8 Inch Steel Studs, 16 Inches o.c. Aug 10, 2012


GFRP : ASTM D 523
GFRP : Specular gloss test. Mar 17, 2011


GFRP : ASTM D2583
GFRP : Test barcol indentation hardness. Mar 17, 2011


GFRP : ASTM D 695-02a
GFRP : Test compression properties, Arcoplast 9.5 mm solid glass/resin core panel. March 17, 2011


GFRP : ASTM D695-02a
GFRP : Test compressive strength properties. Mar 17, 2011


GFRP : ASTM D 790-03
GFRP : Test flexural properties, Arcoplast 9.5 mm solid glass/resin core panel. March 17, 2011


GFRP : Mil 1073.2
GFRP : Test impact resistance. Mar 17, 2011


GFRP : ASTM D 638-03
GFRP : Test tensile properties. Mar 17, 2011


GFRP : ASTM E 96-05
GFRP : Water vapor transmission test. Mar 17, 2011


AIR PRESSURE DECAY : The use of Bio-Seal, which is equally as impermeable, results in an air, gas, and water vapor tight assembly. The process creates a smooth, seamless seal between panels and panel intersections that will not crack or deteriorate.

CLEANING : GFRP will withstand up to and greater than 30 years of vigorous decontamination or wash-downs. It will not decay, dent, fade, or peel, so it will not need to be painted or re-finished.

IMPACT : The GFRP system is designed to outlast the life of the facility. GFRP is impact, corrosion, and chemical resistant, and very robust.

MOISTURE and WATER : GFRP is impervious to microorganisms, impermeable from the front and back, unaffected by moisture and cannot be attacked by insects or vermin.


BARRIER TESTS CONDUCTED USING 9.5 MM GFRP
Results Test

Description

Pass ASME N510

Air pressure decay nuclear air treatment systems test

Pass MEP test

Air pressure decay test on accessories relating to MEP test

Pass Test

Air pressure decay test on expansion joint & electrical face plates test

Pass Test

Air pressure decay test on screw penetrations test

Pass BSL-3, BSL-4

Air pressure decay test small chamber BSL-3, BSL-4 test

Pass Test

Supplemental helium leak testing

Pass Report

Window panel pressure decay test report

GFRP COLOR : Standard color, pristine white

GFRP CUSTOMISED COLOR RANGE : Full range of PMS colors

GFRP COLORATION FASTNESS : Surface color retention and durability based on cleaning and decontamination.


CUSTOM FORMING : Custom molded for curved applications

GFRP FINISH : Front surface finish : Fire rated gel coated resin acrylic

GFRP SURFACE FINISH : Smooth gloss

GFRP SURFACE PROFILE : Polished surface


LIGHTING : GFRP’s pristine high gloss, bright white finish has been shown to produce a light reflectivity of 99.7 % at an 85 degree source angle, so a laboratory can be designed with fewer lamp fixtures, reducing the amount of penetrations to the ceiling surface and evenly diffusing the light throughout the room.

GFRP COLOR SURFACE TESTS CONDUCTED USING 9.5 MM GFRP
Result

Test

Description

Pass ISFA 2-01/td

Arcoplast cleanability & stain resistance

Pass ASTM D 1308-02

Arcoplast surface and sealant chemical compatibility

pass

ISO 2812-4

Arcoplast surface and sealant chemical compatibility

Pass Coloration

Chlorine dioxide decontamination procedure

Pass Coloration

Formaldehyde gas decontamination procedure

Pass Coloration

Hydrogen peroxide vapor decontamination procedure

Pass UV test

Exposure cycles

Arcoplast fiberglass polymer composite panels have the unique ability to integrate both shielding and barrier functions in a single finished product.

Arcoplast is used in mission critical environments and BSL-3, BSL-3Ag and BSL-4 facilities. Our products excel on air pressure decay tests, keeping interior and exterior personnel safe from harmful pathogens.

Arcoplast meets and exceeds USDA, FDA, cGMP, BMBL 5th Edition, USP 797 Compliant, GLSP, NIH and CDC specific guidelines for maximum containment facilities.

COMPLIANCE TESTS CONDUCTED USING 9.5 MM GFRP

Result

Test

Description

MEA 64-96-M UPITT Protocol toxicity test

City of New York Department of Buildings

Pass US FDA 21 CFR 177.2600

Determination of Extractives Residue according to US FDA

Pass LBC 3.1

Living Building Challenge 3.1

Pass CSI 3-Part Format

Product Guide Specification Written According To CSI 3

Pass Compliant test

USDA, FDA, NIH, CDC, NIAID, CANADA AGRICULTURE Compliant


GFRP SHEET SIZES

GFRP sheet sizes are made to your requirement with the parameters of the following thicknesses, widths and lengths.

EMPERIAL


GFRP SIZES & WEIGHTS IMPERIAL
Thickness Width Length Weight R/K Rating
13/64in 4 feet 3 - 16 feet 2.0lbs./ Sq. Ft -
3/8in 4 feet 3 - 16 feet 3.6lbs./ Sq. Ft -
1/2in 4 feet 3 - 16 feet 4.6lbs./ Sq. Ft -
3/4in 4 feet 3 - 16 feet 8lbs./ Sq. Ft -
Tolerance   +/- 1/8in length    

GFRP IMERPIAL PROFILE & JOINT SYSTEM

END CUT PROFILE

13/64in 3/8in 1/2in

3/4in

Grooved

 

Yes Yes

Yes

Eased side edge

 

 

 

Yes

Square cut

Yes Yes Yes

 

 

SIDE EDGE PROFILE

13/64in 3/8in 1/2in

3/4in

Eased side edge

Yes Yes Yes

Yes

Grooved

 

Yes Yes

Yes

Square cut

 

 

 

Yes

 

JOINT SYSTEM

13/64in 3/8in 1/2in

3/4in

Batten cover

Yes

 

 

 

Flush seam

Yes Yes Yes

Yes

Mechanical seam

 

Yes Yes

Yes



GFRP SHEET SIZES

GFRP sheet sizes are made to your requirement with the parameters of the following thicknesses, widths and lengths.


METRIC


GFRP SIZES & WEIGHTS METRIC
Thickness Width Length Weight R/K Rating
5mm 1200mm 900mm - 4875mm 9.76Kg m² -
9.5mm 1200mm 900mm - 4875mm 17.5Kg m² -
12.5mm 1200mm 900mm - 4875mm 22.5Kg m² -
19mm 1200mm 900mm - 4875mm 39.1Kg m² -
Tolerance   +/- 3mm length    

GFRP PROFILE & JOINT SYSTEM

END CUT PROFILE

5mm 9.5mm 12.5mm

19mm

Grooved

 

Yes Yes

Yes

Eased side edge

 

 

 

Yes

Square cut

Yes Yes Yes

 

 

SIDE EDGE PROFILE

5mm 9.5mm 12.5mm

19mm

Eased side edge

Yes Yes Yes

Yes

Grooved

 

Yes Yes

Yes

Square cut

 

 

 

Yes

 

JOINT SYSTEM

5mm 9.5mm 12.5mm

19mm

Batten cover

Yes

 

 

 

Flush seam

Yes Yes Yes

Yes

Mechanical seam

 

Yes Yes

Yes



GFRP COLOR RANGE

Color

Color pristine white

Custom color

Full range of PMS colors


GFRP RANGE OF FINISHES

Custom forming

Custom molded for curved applications

Panel surface

Front surface finish : Fire rated gel coated resin acrylic

Surface finish

Smooth gloss

Surface profile

Polished surface

FIRE & SMOKE TESTS CONDUCTED USING 9.5 MM GFRP
Result

Test

Description

B-s1-d0 EN 13501-1 – Europe, Asia

Classification of reaction to fire performance, in accordance with – Europe, Asia

Pass ISO 9705 Annex B

Full scale room fire test

MEA 414-04-M UPITT Protocol Toxicity Test

Measurement of acute lethality decomposition products

18,9 FS- 63, 4SD UL S-102 Test

On surface burning characteristics (Must be on full composite construction – Canada)

20FS – 145SD ASTM E-84 Test

On surface burning characteristics (Must be on full composite construction – USA)

Pass UL 94 – 5VA 500W

Vertical burning test



In 2009 under the Plastic Chapter 26, the International Building Code (IBC) created a division which addresses fiberglass reinforced polymer composite materials. This enables architects, specifiers and building owners to clearly interpret and conform to a uniform building code.

Composite materials are not incombustible, however the combustibility level can be significantly reduced through proper chemistry engineering. The surface burning characteristics of building materials manufactured in the United States are tested per the (American Standard Testing Method) (ASTM-E 84). In Canada it is determined by Underwriters Laboratories S-102. In Europe, composite materials are tested in accordance with European Standard EN 13823, EN ISO 11925 and EN 13501.

Interior finishes are classified according to their flame spread and smoke spread development indexes.



Manufacturers usually publish the class only. However, there should be a more scrupulous look into the numbers. Owners and architects should require the test results for the flame and smoke generation to better assess the suitability of the interior finishes.

A composite material labeled as a Class A (Flame Spread 0-25) may not have a large margin of improvement because it is already in a low category. But, the (Smoke Development 0-450) is extremely critical, and a composite material with a smoke development of 425 versus 50 can have catastrophic consequences in a high occupancy high rise building.

Another area of concern is the toxicity issue in composite building materials. The City of New York requires testing on materials for acute lethality. This is based on the test methodology specified in the Building Code for the City of New York and as published by the University of Pittsburgh, Department of Industrial Environmental Health Sciences (The UPITT Test - The University of Pittsburgh Test Protocol for Measurement of Acute Lethality of Thermal Decomposition Products from Specimens).

The test has a pass/fail criteria. It must not be more toxic than wood, which produces a 50 percent lethality rate at a total mass of 19.7 grams. Upon the receipt of successful test results, the City of New York will grant a Materials and Equipment Acceptance (MEA) number for the designated product.

[Note: International Building Code Chapter 8 Section 8901.1.1. on interior finishes. Exception: Materials having a thickness less that 0.036 inch (0.9mm) applied directly to the surface of walls or ceilings.]

The IBC does not factor in primers and paint applications or high-performance coatings as an integral part of a wall or ceiling system, whether constructed using a light gauge steel stud and drywall composition or masonry wall. Historically, manufacturers have only been required to test the primer and paint product and coatings without the substrate. It is therefore highly uncertain as to the classification of a given system unless the whole assembly is tested.

Arcoplast fiberglass reinforced composite panels also comply with the IBC Chapter 8 Section 801.1.3 referring to interior finishes below the design flood elevation to be flood-damage-resistant materials.


INSTALLAION MANUAL

• Download GFRP Installation manual ??•


Borrowed from the light gauge steel stud construction methods, Arcoplast fiberglass reinforced composite wall and ceiling systems do not require elaborate pre-engineering preparations in drawings and installation documents and interface well with typical building fixtures such as door and window frames, MEP’s, flooring finishes, etc.


Arcoplast panels are manufactured in modular panel board form that are cut, bored, and fastened in the field reducing engineering and fabrication time and costly project delays due to last minute order changes.


Arcoplast has an extensive library of application drawings and installation details specifically adapted to the construction of high containment facilities.


Arcoplast panels are permanently finished with a smooth, high gloss antimicrobial gel coat, requiring only one trade application and a dry construction environment.








MECHANICAL TESTS CONDUCTED USING 9.5 MM GFRP

Mechanical and Physical Properties The mechanical and physical properties of building materials should be carefully considered when planning the construction of high containment facilities. Flexural and compressive strength, surface hardness, gloss property, coefficient of expansion and contraction, impact resistance and water vapor transmission are crucial factors in the material selection process.

Disappointment and failures are, in many cases, associated with a poor performance of materials or systems design.



Arcoplast Mechanical and Physical Properties comparison chart


Consider this example: A wall to footprint ratio is approximately 1.72 feet times the floor surface. With a 5,000 square foot footprint, the laboratory space will yield approximately 8,600 square feet of partition surface.

Arcoplast Panel System: 7 lbs. x 8600 sq. ft. = 60,200 lbs.

Masonry Block: 45 lbs. x 8,600 sq. ft. = 387,000 lbs.

Poured in Place Concrete: 100 lbs. x 8,600 sq. ft. = 860,000 lbs.

At 7 pounds per square foot, Arcoplast panel systems would clearly cause the least stress on the building. The structural and environmental integrity is achieved through light gauge steel stud framing and Arcoplast modular panel system that work in harmony with the building movement, and constant air cycle movement generated by the air handling systems.




Arcoplast high containment estimate materials graphics



Result Test

Description

55 lbf Interior corner assembly

Joint peel strength test

Pass Partition load bearing

Partition load bearing test

573 lbs Ex. #6 x 25mm Pan Phillips SDS

Pull-out strength of variable fasteners test

Pass FEA report

Seismic loading compliance - FEA report on structural analysis report

330 lbf Instron 5500R

Seismic shear strength test lateral movement – corner section assembly test

556 lbf Instron 5500R

Seismic shear strength test load (peak load) solid panel test

396 lbf Instron 5500R

Seismic shear strength test panel – spline joint assembly test

Pass System load

Walk-on ceiling system load test

Arcoplast panels may be assembled in virtually any configuration, providing the ultimate in design flexibility and allowing for cost-effective “box-within-a-box” construction, walk-on ceilings, wall and ceiling liners, load bearing partitions, chase systems, beam covers and bulkheads. They can be easily adapted to new or existing construction and particularly well suited for high rise buildings.


The weight of building materials plays an essential role in the architecture, design, and engineering of a building, and equally a significant factor in the cost effectiveness of a project. Design and weight limitations, building movement and demanding construction schedules must be carefully assessed. The cost to reinforce a building’s foundation and structure to support the added weight of interior wall and ceiling systems can be exceedingly expensive.



PHYSICAL TESTS CONDUCTED USING 9.5 MM GFRP
Result Test

Description

56.8 ASTM D 2583

Barcol indentation hardness test

27.5 x 10-6 in/in°F ASTM D 696-03

Coefficient of linear thermal expansion test

15920 psi ASTM D 695-02a

Compressive strength properties test

Pass ASTM D3274

Degree of surface disfigurement by fungal/algal growth test

185°F ASTM D 648

DTUL – Deflection temperature under load test

10318 psi ASTM D 790-03

Flexural properties for Reinforced plastics test

18’ x 2 lbs Mil 1073.2

Impact resistance test

Pass ASTM D3273

Resistance to mold on the surface test

10318 psi ISO 846A-B-C

Resistance to bacteria test

0.1 R-Value ASTM D177

Thermal conductivity test

0.05 ASTM C 423-09a / E 795-05

Sound absorption Test

57 ASTM E 90-09 / E 413-10

Sound transmission loss test

99.7 ASTM D 523

Specular gloss test

Pc750 ISO 10012-1

Surface profile & surface finish analysis test

10141 psi ASTM D 638-03

Tensile properties test

0.01 ASTM D 570 (24 x)

Water absorption test

0.01 ASTM E 96-05

Water vapor transmission test

GFRP SPECIALIZED PANELING :

GFRP SPECIALIZED PANELING : Manufactured for specific application of industrial and scientific requirement where no deviation from strict criteria is acceptable. This specialized paneling system is designed to form a comprehensive wall to ceiling membrane, it has all the working features of the GFRP range, but has been modified for specific applications such as : Hospital R/F, RAD, X-Ray or C-Arm departments. The Security Steel shield and Ultra heavy duty paneling systems are for specialized commercial/ government buildings where high security is a requirement. Arcoplast Insulated ceiling panels are designed for temperature and noise controlled environments.

Specialized GFRP paneling are for lining both walls and ceilings to form a single barrier membrane. Arcoplast Insulated ceiling panels integrate with all Arcoplast wall panel systems to form a containment barrier, but the Arcoplast Insulated ceiling panels themselves are only for ceilings.




GFRP SPECIALIZED PANELLING SURFACE : The same gel coat surface is used for both GFRP and GFRP Specialized


GFRP COLOR : Standard color, pristine white

GFRP CUSTOMISED COLOR RANGE : Full range of PMS colors

GFRP COLORATION FASTNESS : Surface color retention and durability based on cleaning and decontamination.


CUSTOM FORMING : Custom molded for curved applications

GFRP FINISH : Front surface finish is made of a fire rated gel coated resin acrylic

GFRP SURFACE FINISH : Smooth gloss

GFRP SURFACE PROFILE : Polished surface


LIGHTING : GFRP’s pristine high gloss, bright white finish has been shown to produce a light reflectivity of 99.7 % at an 85 degree source angle, so a laboratory can be designed with fewer lamp fixtures, reducing the amount of penetrations to the ceiling surface and evenly diffusing the light throughout the room.

GFRP SPECIALIZED COLOR SURFACE TESTS CONDUCTED USING 9.5 MM GFRP

Result

Test

Description

Pass

ISFA 2-01/td

Arcoplast cleanability & stain resistance

Pass

ASTM D 1308-02

Arcoplast surface and sealant chemical compatibility

Pass

ISO 2812-4

Arcoplast surface and sealant chemical compatibility

Pass

Coloration

Chlorine dioxide decontamination procedure

Pass

Coloration

Formaldehyde gas decontamination procedure

Pass

Coloration

Hydrogen peroxide vapor decontamination procedure

Pass

UV test

Exposure cycles

GFRP SPECIALIZED SHEET SIZES

GFRP SPECIALIZED sheet sizes are made to your requirement within the parameters of the following thicknesses, widths and lengths. If you require a thicker gauge/ thickness of lead shielding, this is not a problem, please contact us for details.


IMPERIAL


GFRP SPECIALIZED SIZES & WEIGHTS IMPERIAL
LEAD SHEILD
Thickness R/K Rating Weight Length Width
¾ in - 7.1lbs./ Sq. Ft Up to 12ft 48in


INSULATED CEILING PANELLS
Thickness R/K Rating Weight Length x Width
½ in R/K - 2.1 1.15lbs./ Sq. Ft 23 ¾ in x 23 ¾ in 23 ¾ in x 47 ¾ in 47 ¾ in x 47 ¾ in
1 in R/K - 4.2 1.25lbs./ Sq. Ft 23 ¾ in x 23 ¾ in 23 ¾ in x 47 ¾ in 47 ¾ in x 47 ¾ in
1½ in R/K - 6.3 1.35lbs./ Sq. Ft 23 ¾ in x 23 ¾ in 23 ¾ in x 47 ¾ in 47 ¾ in x 47 ¾ in
2 in R/K – 8.4 1.45lbs./ Sq. Ft 23 ¾ in x 23 ¾ in 23 ¾ in x 47 ¾ in 47 ¾ in x 47 ¾ in


STEEL CORE SHEILD
Thickness R/K Rating Weight Length Width
¾ in - 7.8lbs./ Sq. Ft Up to 12ft 48in


ULTRA HEAVEY DUTY SHEILD
Thickness R/K Rating Weight Length Width
¾ in - 6.7lbs./ Sq. Ft Up to 12ft 48in



GFRP SPECIALIZED IMERPIAL PROFILE & JOINT SYSTEM : Standard gauges.

These are our standard panel dimensions for Lead, Security steel core and Ultra heavy duty.
If you require a thicker gauge of lead shielding, this is not a problem, please contact us to discuss your requirements.

PROFILE

LEAD STEEL CORE ULTRA HEAVY DUTY

END CUT PROFILE

½ in ¾ in ¾ in

Grooved

Yes Yes Yes

Eased side edge

 

 

 

Square cut

Yes Yes Yes
 

     

SIDE EDGE PROFILE

½ in ¾ in ¾ in

Eased side edge

Yes Yes Yes

Grooved

Yes Yes Yes

Square cut

 

 

 

 

     

JOINT SYSTEM

½ in ¾ in ¾ in

Batten cover

Yes Yes Yes

Flush seam

Yes Yes Yes

Mechanical spline

Yes Yes Yes


GFRP SPECIALIZED SHEET SIZES

GFRP SPECIALIZED sheet sizes are made to your requirement within the parameters of the following thicknesses, widths and lengths. If you require a thicker gauge/ thickness of lead shielding, this is not a problem, please contact us for details.


METRIC


GFRP SPECIALIZED SIZES & WEIGHTS METRIC
LEAD SHEILD
Thickness R/K Rating Weight Length Width
12.5mm - 35.32Kg. / Sq. m Up to 3650mm 1200mm


INSULATED TILES
Thickness R/K Rating Weight Length x Width
12.5mm R/K - 2.1 5.6Kg m² 600mm x 600mm 600mm x 1200mm 1200mm x 1200mm
25mm R - 4.2 6.1Kg m² 600mm x 600mm 600mm x 1200mm 1200mm x 1200mm
37.5mm R/K - 6.3 6.6Kg m² 600mm x 600mm 600mm x 1200mm 1200mm x 1200mm
50mm R/K – 8.4 7.1Kg m² 600mm x 600mm 600mm x 1200mm 1200mm x 1200mm

 

 

STEEL CORE SHEILD
Thickness R/K Rating Weight Length Width
19mm - 38.3Kg. / Sq. m Up to 3650mm 1200mm


ULTRA SHEILD
Thickness R/K Rating Weight Length Width
19mm - 32.5Kg. / Sq. m Up to 3650mm 1200mm

GFRP SPECIALIZED METRIC PROFILE & JOINT SYSTEM :

These are our standard panel dimensions for Lead, Security steel core and Ultra heavy duty.
If you require a thicker gauge of lead shielding, this is not a problem, please contact us to discuss your requirements.

PROFILE

LEAD STEEL CORE ULTRA HEAVY DUTY

END CUT PROFILE

12.5mm 19mm 19mm

Grooved

Yes Yes Yes

Eased side edge

 

 

 

Square cut

Yes Yes Yes
 

     

SIDE EDGE PROFILE

12.5mm 19mm 19mm

Eased side edge

Yes Yes Yes

Grooved

Yes Yes Yes

Square cut

 

 

 

 

     

JOINT SYSTEM

12.5mm 19mm 19mm

Batten cover

Yes Yes Yes

Flush seam

Yes Yes Yes

Mechanical spline

Yes Yes Yes



GFRP SPECIALIZED COLOR RANGE

Color

Color pristine white

Custom color

Full range of PMS colors



GFRP SPECIALIZED RANGE OF FINISHES

Custom forming

Custom molded for curved applications

Panel surface

Front surface finish : Fire rated gel coated resin acrylic

Surface finish

Smooth gloss

Surface profile

Polished surface

INTERGRATED COMPONENTS :

Arcoplast supply a dedicated range of accessories and components that integrate into the Arcoplast system of panels, doors, hatches, and various window glazing setups, including the VLADS control console. Direct attach, penetrations or encasing bulkheads with covers and moldings is a science of adhesives and sealants. The Arcoplast system is designed to accommodate the working infrastructure of a facilities amenities and plant equipment, how ever complicated it might be.





SEALANTS & ADHESIVES
Bio-Seal : DWG A7
Bio-Seal : Handicap grab bar attachment detail


Bio-Seal : BA-1-EP
Bio-Seal : Acryloyl - Bio-Seal wall to panel base joint with termination strip


Bio-Seal : P-1
Bio-Seal : Electrical duplex termination strip


Bio-Seal : P-4
Bio-Seal : Piping or conduit penetration installation


Bio-Seal : PP-1
Bio-Seal : GFRP wall panel spine assembly



Bio-Seal : PPS-2-MC
Bio-Seal: GFRMC wall panel over gypsum board joint assembly


Bio-Seal : PP-9-EP
Bio-Seal : Arcoplast wall panel to ceiling


Bio-Seal : WF-3
Bio-Seal : Aluminum window frame glazing, GFRP wall panel each side of wall


DOORS
Door : D-11
DOOR : Molded fiberglass door.


Door : D-25
DOOR : Modular panel/ door installation procedure.


Door : D-30
DOOR : Modular panel/ door frame installation procedure, over existing conditions.


Door : D-35
DOOR : Modular panel/ flush door frame installation procedure



HATCHES
Hatch : BC-1
HATCH : AD-1 Electrical panel access door.


Hatch : AD-2
HATCH : AD-2 Cammed high pressure stainless steel access door.


Hatch : AD-3
HATCH : AD-3 Access door with seal 8 x 8.


Hatch : AD-4
HATCH : AD-4 Access door with seal 12 x 12.


Hatch : AD-5
HATCH : AD-5 Access door with seal 18 x 18.


Hatch : AD-6
HATCH : AD-6 Access door with seal 24 x 24.


Hatch : AD-7
HATCH : AD-7 Removable access panel frame, GFRP panel.


Hatch : AD-7 EP
HATCH : AD-7 EP Removable access panel frame, Acryloyl (engineered polymer) panel.


Hatch : AD-8
HATCH : AD-8 Removable accessory panel floor ceiling attachment details.


Hatch : AD-9
HATCH : AD-9 Fire extinguisher cabinet.


Hatch : AD-10
HATCH : AD-10 24 x 30 access door with seal.


MOLDINGS
Moldings : BC-1
Moldings: Insulated GFRMC beam cover


Moldings : BC-2
Moldings: Insulated GFRMC beam cover


Moldings : BC-3
Moldings: Insulated GFRMC beam cover


Moldings : BC-4
Moldings: Insulated GFRMC beam cover


Moldings : BC-5
Moldings: Insulated GFRMC beam cover


Moldings : BC-6
Bio-Seal: Insulated GFRMC beam cover test drain port


Moldings : BC-7
Bio-Seal: Insulated metal panel system


Moldings : BC-8
Bio-Seal: Insulated metal panel system


Moldings : BC-9
Bio-Seal: Insulated metal panel system


Moldings : BC-10
Moldings : Insulated GFRP corner cover


Moldings : BH-1
Moldings : One piece GFRP bulkhead fascia>


Mouldings : CH-1
Moldings : Utility chase detail


Flush, Molded and Pultruded window Glazing:

Arcoplast offer 3 different forms of Glazing. (1) Flush is a modern streamline single or double glazed window system designed for containment up to PC3 and BSL4 laboratories. (2) Molded is idea for new builds or upgrading a facility, the window wall depth ranges from 3 - 10 inches and the thickness of glass available varies from 1/4 - 1/2 inch. (3) Pultruded is the robust product in the range, designed for facilities that incur heavy traffic and other similar challenging conditions